zfb132

方法一：
为 PowerShell 设置代理，命令如下：

$Env:http_proxy="http://127.0.0.1:7890";
$Env:https_proxy="http://127.0.0.1:7890";

这是临时命令，重新代理终端需要重新输入
如果想要永久设置代理，建议使用自定义配置，使每次代理 PowerShell 窗口时，运行如上命令：

在 PowerShell 窗口中运行如下指令：

Hendrik44

set -e
if grep -xq "pam_tid.so" /etc/pam.d/sudo; then
	echo "Option to use touchid for sudo already installed :)"
else
	echo "Configure to use Touchid for sudo ..."
	sudo chmod 644 /etc/pam.d/sudo # change permission to have write access
	sudo cp /etc/pam.d/sudo /etc/pam.d/sudo.org # make a copy of original file
	echo 'auth       sufficient     pam_tid.so' | cat - /etc/pam.d/sudo > sudo && mv sudo /etc/pam.d/sudo # append file
	sudo chmod 444 /etc/pam.d/sudo # change permission back
	echo "Touchid for sudo successfully configured. A copy of the original file you will find here: /etc/pam.d/sudo.org"

ValdikSS

Huawei E5885 current firmware backup manual.

1. Download modified usbloader, which will copy proper busybox into /system/busybox and enable telnetd on your device (will add additional line into /system/autorun.sh). Use it only on E5885, not on other device!
2. Load it using balong-usbdload. Refer to this disassembling manual.
3. After loading, wait about one minute, disconnect device from the computer and power off the device holding power button for ~15 seconds.
4. Insert MicroSD card to the device and power it on.
5. telnet 192.168.8.1 2323

/system/busybox sh

gjedeer

127.0.0.1 111.94.62.42.in-addr.arpa
127.0.0.1 12.200.206.111.in-addr.arpa
127.0.0.1 171.176.77.52.in-addr.arpa
127.0.0.1 196.170.220.52.in-addr.arpa
127.0.0.1 48.183.251.54.in-addr.arpa
127.0.0.1 57.94.62.42.in-addr.arpa
127.0.0.1 78.204.243.124.in-addr.arpa
127.0.0.1 8.33.134.120.in-addr.arpa
127.0.0.1 a.netcheck.gallery.pandora.xiaomi.com
127.0.0.1 api.ad.xiaomi.com

cosysn

import requests
import logging

url='http://readfree.me/accounts/checkin'
cookie_str='' # 需要登录到readfree上获取当时的cookie值，然后直接使用该cookie值进行登录签到

logging.basicConfig(level=logging.INFO,
                    filename='/var/log/readfree_auto_sig.log',
                    filemode='a',
                    format='%(asctime)s - [line:%(lineno)d] - %(levelname)s: %(message)s')

mariotaku

Usage

1. Execute pip3 install -r requirements.txt to install dependencies
2. Execute followers_clear.py and follow instructions.

Notes

Consumer keys can be found here. Use these keys instead of applying yourself can get rid of rate limit.

alswl

127.0.0.1 api.ad.xiaomi.com
127.0.0.1 sdkconfig.ad.xiaomi.com
127.0.0.1 ad.mi.com
127.0.0.1 ad.xiaomi.com
127.0.0.1 ad1.xiaomi.com

127.0.0.1 adv.sec.miui.com
127.0.0.1 test.ad.xiaomi.com
127.0.0.1 new.api.ad.xiaomi.com

mrkpatchaa

Use this trick to bulk delete your old repos or old forks

(Inspired by https://medium.com/@icanhazedit/clean-up-unused-github-rpositories-c2549294ee45#.3hwv4nxv5)

1. Open in a new tab all to-be-deleted github repositores (Use the mouse’s middle click or Ctrl + Click) https://github.com/username?tab=repositories

2. Use one tab https://chrome.google.com/webstore/detail/onetab/chphlpgkkbolifaimnlloiipkdnihall to shorten them to a list.

3. Save that list to some path

4. The list should be in the form of “ur_username\repo_name” per line. Use regex search (Sublime text could help). Search for ' |.*' and replace by empty.

jason5ng32

[General]
loglevel = notify
skip-proxy = 127.0.0.1, 192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12, 100.64.0.0/10, localhost, *.local, ::ffff:0:0:0:0/1, ::ffff:128:0:0:0/1
bypass-tun = 192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12

# dns-server = 119.29.29.29,223.5.5.5,114.114.115.115
# external-controller-access = PASSWORD@0.0.0.0:6155
# ipv6 = true

// REMEMBER TO CHANGE THE external-controller-access' PASSWORD