This guide details how to set up a clean rooted system.
The list of global Android hotkeys may be useful: https://github.com/Magicx-Breeze/Dawn/wiki/Default_Control_EN
Flash the image with the tool.
EmulationStation is a graphical and themeable emulator front-end created by Aloshi around 2012. Their original work has been the foundation for the UX of many of our favorite gaming focused projects over the last decade and this document aims to capture a small bit of that history. If you see any errors please let me know in the comments below and I will gladly update this document.
This project has been moved to: https://github.com/RJNY/Obtainium-Emulation-Pack
| { | |
| "0":{ | |
| "day":{ | |
| "description":"Sunny", | |
| "image":"http://openweathermap.org/img/wn/01d@2x.png" | |
| }, | |
| "night":{ | |
| "description":"Clear", | |
| "image":"http://openweathermap.org/img/wn/01n@2x.png" | |
| } |
| $repourl = "https://arduboy.ried.cl/repo.json" | |
| $romsdir = "./arduboy/roms" | |
| $mediadir = "./arduboy/screenshots" | |
| #emulation station destkop editon gamelist | |
| $gameslist = "./arduboy/gamelist.xml" | |
| if (!(Test-Path -Path $romsdir)) | |
| { | |
| New-Item -ItemType Directory $romsdir | |
| } |
For those who prefer to avoid solutions like iCloud Photos and Dropbox for backing up photos, you can sync your iPhone photos with Syncthing. To do this, you'll need two things:
Möbius Sync is, to my knowledge, the only actively-maintained Syncthing client for iOS. It's free to sync up to 20 MB, and only $4.99 (one-time) to remove that limit.
PhotoSync is a nifty iOS app for syncing photos to a number of different destinations. It's free for low-quality
I just put the finishing touches on my Raspberry Pi 3 emulation machine running RetroArch. I was not a huge fan of RetroPie due to the reliance on Emulation Station - more moving parts meant that there were more things that could potentially break. I just wanted something that would run raw RetroArch, no frills.
This tutorial is mostly recreated from memory and was most recently tested with a Raspberry Pi 3 running Raspbian Stretch and RetroArch 1.7.7. If there is a mistake or a broken link, PLEASE message me and I will fix it.
I used Raspbian Stretch Lite from this page. Write the image to your SD card using something like Win32 Disk Imager, or if you're using OSX/Linux follow a tutorial on how to write the image using dd.
| [MiSTer] | |
| key_menu_as_rgui=0 ; set to 1 to make the MENU key map to RGUI in Minimig (e.g. for Right Amiga) | |
| forced_scandoubler=0 ; set to 1 to run scandoubler on VGA output always (depends on core). | |
| ypbpr=0 ; set to 1 for YPbPr on VGA output. | |
| composite_sync=0 ; set to 1 for composite sync on HSync signal of VGA output. | |
| vga_scaler=1 ; set to 1 to connect VGA to scaler output. | |
| hdmi_audio_96k=0 ; set to 1 for 96khz/16bit HDMI audio (48khz/16bit otherwise) | |
| keyrah_mode=0x18d80002 ; VIDPID of keyrah for special code translation (0x23418037 for Arduino Micro) | |
| volumectl=0 ; enable audio volume control by multimedia keys | |
| vscale_mode=1 ; 0 - scale to fit the screen height. |
Guide for myself and others to get RetroArch running on the new Raspberry Pi 4 while projects like RetroPie get an image out for the rpi4.
Disclaimer: I am not an expert and this may not be the most optimal build possible, but it works.
Inspiration taken from:
| # See /boot/overlays/README for all available options | |
| ############################################################################## | |
| ## Raspberry Pi Configuration Settings | |
| ## | |
| ## Revision 18, 2018/03/05 | |
| ## | |
| ## Details taken from the eLinux wiki | |
| ## For up-to-date information please refer to wiki page. | |
| ## | |
| ## Wiki Location : http://elinux.org/RPiconfig |