| MTU Size Range | Protocol Efficiency | Contention/Blockage Cost | Fragmentation Risk | Suitable WMN Application |
|---|---|---|---|---|
| Very Small (<576 B) | Very Low | Minimal | Zero | Real-time control, VoIP, critical telemetry requiring guaranteed low latency. |
| Constrained Optimum (1300–1400 B) | Medium-High | Moderate | Minimal (Aligned with PMTUD) | Robust multi-hop backhaul, systems using VPN or cellular tunnels (e.g., 1360–1440 bytes). |
| Standard (1452–1500 B) | High | Moderate to High | High (if path has tunnels/PPPoE) |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| /* | |
| * MPU6500 data acquisition on ESP32-C5 using Adafruit Library | |
| * ------------------------------------------------------------------- | |
| * Target board: DFRobot FireBeetle 2 ESP32-C5. | |
| * | |
| * Wiring (I2C): | |
| * MPU6500 VCC -> 3V3 | |
| * MPU6500 GND -> GND | |
| * MPU6500 SDA -> IO2 | |
| * MPU6500 SCL -> IO3 |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| /* | |
| * MPU6500 data acquisition on ESP32-C5 using Adafruit Library | |
| * ------------------------------------------------------------------- | |
| * Target board: DFRobot FireBeetle 2 ESP32-C5. | |
| * | |
| * Wiring (I2C): | |
| * MPU6500 VCC -> 3V3 | |
| * MPU6500 GND -> GND | |
| * MPU6500 SDA -> IO2 | |
| * MPU6500 SCL -> IO3 |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| /* | |
| * Vibration Inference App - Arduino IDE version (with Buzzer Alert) | |
| * ESP32 DevKit V1 + MPU6050 + Buzzer | |
| */ | |
| #include <Arduino.h> | |
| #include <Adafruit_MPU6050.h> | |
| #include <Adafruit_Sensor.h> | |
| #include <Wire.h> | |
| #include "DemoVibration_inferencing.h" |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| /* | |
| * ============================================================ | |
| * MQTT WiFi Hands-On - Exilir ESP32-C5 / DFRobot C5 | |
| * ============================================================ | |
| * | |
| * Hardware: | |
| * Board : DFRobot FireBeetle 2 ESP32-C5 | |
| * WS2812B : GPIO27 | |
| * HW-508 Buzzer : GPIO23 (PASSIVE buzzer) | |
| * |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| /* | |
| * Passive Buzzer HW-508 - ESP32-C5 | |
| * Arduino core for ESP32 v3.x | |
| * | |
| * Wiring: | |
| * HW-508 "S" -> GPIO23 | |
| * HW-508 tengah -> tidak disambung (NC) | |
| * HW-508 "-" -> GND | |
| * | |
| * HW-508 adalah passive buzzer. |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| /* | |
| * MPU6500 full data acquisition on ESP32-C5 (Arduino-ESP32 core 3.x) | |
| * ------------------------------------------------------------------- | |
| * Target board tested against: DFRobot FireBeetle 2 ESP32-C5. | |
| * | |
| * Reads every sensor channel the MPU6500 provides: | |
| * - Accelerometer X/Y/Z (raw LSB + g) | |
| * - Gyroscope X/Y/Z (raw LSB + deg/s) | |
| * - Die temperature (raw LSB + degC) | |
| * plus device identity (WHO_AM_I) and the factory self-test values. |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| /* | |
| * Buzzer berkedip - ESP32-C5 + modul KY-012 (buzzer AKTIF) | |
| * Arduino core for ESP32 v3.x | |
| * | |
| * Wiring: | |
| * KY-012 "S" -> GPIO23 | |
| * KY-012 tengah -> tidak disambung (NC) | |
| * KY-012 "-" -> GND | |
| * | |
| * Buzzer aktif = punya osilator sendiri, cukup diberi HIGH/LOW (active-high). |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| /* | |
| * WS2812B Random RGB Color — ESP32-C5 | |
| * Data pin : GPIO27 (IO27) | |
| * Library : Adafruit_NeoPixel (Library Manager -> "Adafruit NeoPixel") | |
| * Board : ESP32C5 Dev Module (Arduino-ESP32 core 3.x ke atas) | |
| * | |
| * Setiap interval, tiap LED diberi warna acak. | |
| * Ubah MODE_ALL_SAME menjadi true kalau ingin seluruh strip satu warna acak yang sama. | |
| */ |
NewerOlder