jmason

Recent changes in the tech scene have made it clear that relying on commercial companies to provide services I rely on isn't a good strategy in the long term, and given that Tailscale is so effective these days as a remote-access system, I've gradually been expanding a small collection of self-hosted web apps and services running on my home network.

Until now they've mainly been addressed using their IP addresses and random high ports on the internal LAN, for example:

• Pihole: http://10.19.72.7/admin
• Home Assistant: http://10.19.72.11:8123/
• Linkding: http://10.19.72.6:9092/

gruber

use AppleScript version "2.4" -- Yosemite (10.10) or later
use scripting additions

(*
Original script: John Gruber (https://daringfireball.net/linked/2023/12/05/an-applescript-for-safari-split-tabs-to-new-window)
Much more elegant version: Leon Cowle (https://github.com/leoncowle)
Even more elegant version: https://stackoverflow.com/questions/54066100/applescript-to-split-safari-tabs-into-new-window/54089865#54089865

Worth a warning: "moving" tabs with this script doesn't actually move them like
drag-and-drop does. The tabs "moved" by this script will reload in the new window,

scyto

📖 This guide has moved

The maintained version now lives at CEPH HA Setup, part of scyto/homelab-docs.

Questions or troubleshooting? Continue the conversation here — a Q&A discussion where replies thread properly, answers can be marked, and everything is searchable. The 73 comments below stay exactly where they are as an archive.

scyto

📖 This guide has moved

The maintained version now lives at ProxMox Cluster - Soup-to-Nutz, part of scyto/homelab-docs.

Questions or troubleshooting? Continue the conversation here — a Q&A discussion where replies thread properly, answers can be marked, and everything is searchable. The 51 comments below stay exactly where they are as an archive.

MatthiasLohr

Beelink GTR5 + Proxmox VE + Windows Guest using the Vega8 Graphics Card

Prerequisites

Hardware

• Current BIOS version: 5.19
• 1TB Kingston NVMe SSD (shipped with the device, used for system)
• 1TB Samsung 860 EVO 2.5" SATA SSD (bought additionally, for Windows 10)
• Installation images for Proxmox VE, Windows 10 (e.g. using Ventoy)

dcode

How to setup Grandstream DP750 for Unifi Talk

I've seen several posts on Reddit and other forums that say "oh you can use a grandstream phone with UniFi Talk and it's flawless". Unfortunately, I am not a VoIP engineer so it was not intuitive to me, but I got it to work. Here's how.

For this writeup, I'm using a Grandstream DP750 DECT base with a DP720 DECT wireless handset. I really wanted a wireless phone for general use in my house, but Ubiquiti doesn't make one, so I wanted to find a way. My goal is to setup UniFi Talk for my home phone solution and share a single phone number with a UniFi wired phone that sits on my office desk. As far as I know, you have to get a UniFi phone to do the initial Talk setup (though, in my tinkering, I noticed it's using a PostgreSQL database, you could probably bypass the initial setup if you knew what you were doing). I'm also using a UDM-Pro for my gateway.

Assuming your UDM-Pro management interface is on 192.168.1.1, your base station should be assigned an IP on a VL

sbyx

blueprint:
  name: Low battery level detection & notification for all battery sensors
  description: Regularly test all sensors with 'battery' device-class for crossing
    a certain battery level threshold and if so execute an action.
  domain: automation
  input:
    threshold:
      name: Battery warning level threshold
      description: Battery sensors below threshold are assumed to be low-battery (as
        well as binary battery sensors with value 'on').

DJMarlow

FLITE KEG SENSOR AND CONTROLLER DIY

This DIY will walk you through the steps to build your own Flite keg sensor and controller. Before getting started, it's recommended that you have the following tools and skills:

---

TOOLS

• Drill press with drill bits for stainless steel
• Soldering iron
• 3D printer

gavinr

blakadder

fan:
  - platform: mqtt
    name: "Diffuser"
    availability_topic: "tele/diffuser/LWT"
    payload_available: "Online"
    payload_not_available: "Offline"
    state_topic: "stat/diffuser/POWER1"
    command_topic: "cmnd/diffuser/POWER1"
    speed_state_topic: "stat/diffuser/FAN"
    payload_low_speed: low